Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
ADSST-AVR-1167
Product Overview
Category: Microcontroller
Use: Embedded Systems
Characteristics: High-performance, low-power consumption
Package: 64-pin QFP (Quad Flat Package)
Essence: Advanced Digital Signal Processing (DSP) capabilities
Packaging/Quantity: Individually packaged, single unit
Specifications
- Architecture: AVR (Advanced Virtual RISC)
- Clock Speed: 16 MHz
- Flash Memory: 128 KB
- RAM: 8 KB
- Operating Voltage: 2.7V - 5.5V
- Digital I/O Pins: 54
- Analog Input Pins: 8
- Communication Interfaces: UART, SPI, I2C
- Timers/Counters: 6
- ADC Resolution: 10-bit
- PWM Channels: 6
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The ADSST-AVR-1167 microcontroller features a 64-pin QFP package with the following pin configuration:
- VCC
- GND
- XTAL1
- XTAL2
- RESET
- PORTA0
- PORTA1
- PORTA2
- PORTA3
- PORTA4
- PORTA5
- PORTA6
- PORTA7
- PORTB0
- PORTB1
- PORTB2
- PORTB3
- PORTB4
- PORTB5
- PORTB6
- PORTB7
- PORTC0
- PORTC1
- PORTC2
- PORTC3
- PORTC4
- PORTC5
- PORTC6
- PORTC7
- PORTD0
- PORTD1
- PORTD2
- PORTD3
- PORTD4
- PORTD5
- PORTD6
- PORTD7
- PORTE0
- PORTE1
- PORTE2
- PORTE3
- PORTE4
- PORTE5
- PORTE6
- PORTE7
- PORTF0
- PORTF1
- PORTF2
- PORTF3
- PORTF4
- PORTF5
- PORTF6
- PORTF7
- AVCC
- AREF
- GND
- ADC0
- ADC1
- ADC2
- ADC3
- ADC4
- ADC5
- ADC6
- ADC7
Functional Features
- Advanced Digital Signal Processing (DSP) capabilities
- High-performance AVR architecture
- Low-power consumption for energy-efficient applications
- Wide operating voltage range for flexibility
- Ample flash memory and RAM for complex programs
- Multiple communication interfaces for versatile connectivity
- Rich set of timers/counters and PWM channels for precise timing control
- High-resolution ADC for accurate analog measurements
Advantages and Disadvantages
Advantages: - Powerful DSP capabilities enable efficient signal processing tasks - High-performance AVR architecture ensures fast execution of instructions - Low-power consumption extends battery life in portable devices - Versatile communication interfaces facilitate seamless integration with other components - Abundant memory resources allow for complex program storage - Precise timing control through timers/counters and PWM channels - Accurate analog measurements with the high-resolution ADC
Disadvantages: - Limited number of I/O pins may restrict the number of connected peripherals - Higher cost compared to simpler microcontrollers with fewer features - Steeper learning curve for beginners due to advanced DSP capabilities
Working Principles
The ADSST-AVR-1167 microcontroller operates based on the AVR architecture, which utilizes a RISC (Reduced Instruction Set Computing) approach. It executes instructions at high speed while consuming minimal power. The DSP capabilities of the microcontroller enable efficient processing of digital signals, making it suitable for applications such as audio processing, motor control, and sensor interfacing.
The microcontroller communicates with external devices through its UART, SPI, and I2C interfaces, allowing seamless integration into various embedded systems. Its timers/counters and PWM channels provide precise timing control, essential for tasks like generating accurate waveforms or controlling motor speed.
The ADC module enables the microcontroller to convert analog signals into digital values with high resolution, facilitating accurate measurements in applications that require analog input processing.
Detailed Application Field Plans
The ADSST-AVR-1167 microcontroller finds applications in various fields, including:
- **Industrial
Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του ADSST-AVR-1167 σε τεχνικές λύσεις
Sure! Here are 10 common questions and answers related to the application of ADSST-AVR-1167 in technical solutions:
Q: What is ADSST-AVR-1167? A: ADSST-AVR-1167 is a microcontroller-based development board designed for various technical applications.
Q: What are the key features of ADSST-AVR-1167? A: The key features include an AVR microcontroller, multiple I/O pins, analog-to-digital converters, UART, SPI, and I2C interfaces.
Q: How can I program ADSST-AVR-1167? A: ADSST-AVR-1167 can be programmed using popular programming languages like C or assembly language through an integrated development environment (IDE) such as Atmel Studio.
Q: Can ADSST-AVR-1167 be used for IoT projects? A: Yes, ADSST-AVR-1167 can be utilized in IoT projects by integrating it with sensors, actuators, and communication modules.
Q: Is ADSST-AVR-1167 suitable for robotics applications? A: Absolutely! ADSST-AVR-1167 is commonly used in robotics due to its versatile I/O capabilities and real-time control features.
Q: Can I interface ADSST-AVR-1167 with other microcontrollers? A: Yes, ADSST-AVR-1167 supports various communication protocols like UART, SPI, and I2C, allowing seamless integration with other microcontrollers.
Q: Does ADSST-AVR-1167 have built-in analog-to-digital converters (ADC)? A: Yes, ADSST-AVR-1167 has onboard ADCs that enable the conversion of analog signals into digital values for processing.
Q: What power supply does ADSST-AVR-1167 require? A: ADSST-AVR-1167 typically operates on a 5V DC power supply, which can be provided through USB or an external power source.
Q: Can I use ADSST-AVR-1167 for data logging applications? A: Yes, ADSST-AVR-1167 can be used for data logging by connecting it to external storage devices like SD cards or EEPROMs.
Q: Are there any online resources available for learning about ADSST-AVR-1167? A: Yes, there are numerous online tutorials, forums, and documentation available that provide guidance on using ADSST-AVR-1167 in technical solutions.
Please note that the specific details and answers may vary depending on the actual product and its documentation.