Cantherm
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
MF72-020D13
Δείτε Λεπτομέρειες Φύλλα δεδομένων

MF72-020D13

Product Overview

Category

The MF72-020D13 belongs to the category of thermistors.

Use

It is commonly used for temperature sensing and control in various electronic devices and circuits.

Characteristics

  • Temperature Sensing: The MF72-020D13 exhibits a high sensitivity to temperature changes.
  • Stability: It offers stable performance across a wide temperature range.
  • Reliability: Known for its reliable and consistent temperature measurement capabilities.

Package

The MF72-020D13 is typically available in a small, cylindrical package.

Essence

The essence of the MF72-020D13 lies in its ability to accurately sense and respond to temperature variations in electronic systems.

Packaging/Quantity

It is usually packaged in reels or trays, with quantities varying based on the supplier and customer requirements.

Specifications

  • Resistance at 25°C: 20Ω ± 20%
  • Maximum Power Dissipation: 400mW
  • Operating Temperature Range: -55°C to 125°C
  • Thermal Time Constant: ≤10s

Detailed Pin Configuration

The MF72-020D13 features two leads, with the resistance measured across these leads varying with temperature.

Functional Features

  • Temperature Sensing: The primary function of the MF72-020D13 is to sense temperature changes and provide corresponding resistance variations.
  • Control: It can be integrated into circuits to control heating or cooling systems based on temperature readings.

Advantages

  • High Sensitivity: The MF72-020D13 offers high sensitivity to temperature changes, making it suitable for precise temperature control applications.
  • Wide Operating Temperature Range: It can operate effectively across a broad temperature range, enhancing its versatility.

Disadvantages

  • Nonlinear Response: Like many thermistors, the MF72-020D13 exhibits a nonlinear response to temperature changes, requiring calibration in some applications.
  • Limited Precision: In certain high-precision applications, the inherent variability of thermistors may pose challenges.

Working Principles

The MF72-020D13 operates based on the principle of resistance change with temperature. As the temperature varies, the resistance of the thermistor changes, allowing it to serve as an effective temperature sensor.

Detailed Application Field Plans

The MF72-020D13 finds extensive use in various applications, including: - Temperature Control Systems: Used in heating, ventilation, and air conditioning (HVAC) systems for temperature regulation. - Automotive Electronics: Employed in automotive climate control systems and engine management for temperature monitoring. - Consumer Electronics: Integrated into devices such as coffee makers and hair dryers for temperature sensing and control.

Detailed and Complete Alternative Models

  • NTC Thermistors: Offer similar temperature sensing capabilities with varying resistance-temperature characteristics.
  • PTC Thermistors: Provide different temperature-resistance behavior, suitable for specific temperature control applications.

In conclusion, the MF72-020D13 thermistor serves as a crucial component in temperature sensing and control systems across diverse industries, offering high sensitivity and reliability within a wide temperature range.

[Word Count: 443]

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του MF72-020D13 σε τεχνικές λύσεις

  1. What is MF72-020D13?

    • MF72-020D13 is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of MF72-020D13?

    • MF72-020D13 is commonly used in temperature sensing, temperature compensation, inrush current limiting, and temperature control circuits.

  3. What is the resistance value of MF72-020D13 at room temperature?

    • The resistance value of MF72-020D13 at room temperature is 20 ohms.

  4. How does MF72-020D13 behave with changes in temperature?

    • MF72-020D13 exhibits a negative temperature coefficient, meaning its resistance decreases as the temperature increases.

  5. Can MF72-020D13 be used for inrush current limiting?

    • Yes, MF72-020D13 can be used for inrush current limiting in power supply circuits to protect components from excessive current during startup.

  6. What is the operating temperature range of MF72-020D13?

    • The operating temperature range of MF72-020D13 is typically -55°C to 125°C.

  7. Is MF72-020D13 suitable for temperature compensation in electronic circuits?

    • Yes, MF72-020D13 is commonly used for temperature compensation in electronic circuits to maintain stable performance over a range of temperatures.

  8. What are the advantages of using MF72-020D13 in technical solutions?

    • Some advantages of using MF72-020D13 include its small size, fast response time, and high reliability in temperature sensing applications.

  9. Can MF72-020D13 be directly soldered onto PCBs?

    • Yes, MF72-020D13 can be directly soldered onto PCBs, making it convenient for integration into electronic assemblies.

  10. Are there any precautions to consider when using MF72-020D13 in technical solutions?

    • It's important to ensure proper thermal management and avoid exceeding the maximum power dissipation to prevent damage to MF72-020D13. Additionally, attention should be given to the self-heating effect at higher currents.