Intersil
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
ISL6844IUZ-T
Δείτε Λεπτομέρειες Φύλλα δεδομένων

ISL6844IUZ-T

Product Overview

Category

ISL6844IUZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit with advanced power management features
  • High efficiency and low power consumption
  • Compact package for space-constrained designs
  • Wide operating voltage range
  • Robust protection features against overvoltage and overcurrent

Package

ISL6844IUZ-T is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6844IUZ-T lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 10A
  • Switching Frequency: 200kHz to 1MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

ISL6844IUZ-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. COMP: Compensation pin
  5. EN: Enable pin
  6. SS/TR: Soft-start/Tracking pin
  7. PGND: Power ground pin
  8. VCC: Supply voltage pin
  9. BOOT: Bootstrap pin
  10. LX: Switch node pin

Functional Features

  • Voltage mode control for precise regulation
  • Adjustable soft-start for controlled startup
  • Overvoltage protection for enhanced safety
  • Overcurrent protection for device and load protection
  • Fault detection and reporting for easy troubleshooting
  • Adjustable switching frequency for optimization

Advantages and Disadvantages

Advantages

  • High efficiency leading to reduced power consumption
  • Wide operating voltage range for versatile applications
  • Robust protection features ensure device and load safety
  • Compact package suitable for space-constrained designs

Disadvantages

  • Limited maximum output current of 10A
  • Higher switching frequencies may introduce electromagnetic interference (EMI)

Working Principles

ISL6844IUZ-T operates on the principle of voltage mode control. It regulates the output voltage by comparing it with a reference voltage and adjusting the duty cycle of the switching signal accordingly. This ensures precise regulation and stability.

Detailed Application Field Plans

ISL6844IUZ-T finds applications in various fields, including but not limited to: 1. Power supplies for industrial equipment 2. Automotive electronics 3. Telecommunications infrastructure 4. Renewable energy systems 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6844IUZ-T are: 1. LT3845A 2. LM5116 3. MAX15062 4. TPS54360

These models can be considered as alternatives based on specific requirements and design constraints.

Word count: 320 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του ISL6844IUZ-T σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of ISL6844IUZ-T in technical solutions:

  1. Q: What is ISL6844IUZ-T? A: ISL6844IUZ-T is a high-performance, synchronous buck controller IC used for power management applications.

  2. Q: What is the input voltage range supported by ISL6844IUZ-T? A: The input voltage range supported by ISL6844IUZ-T is typically between 4.5V and 14V.

  3. Q: What is the output voltage range that can be achieved using ISL6844IUZ-T? A: The output voltage range achievable with ISL6844IUZ-T depends on the external components used, but it can typically range from 0.6V to 5.5V.

  4. Q: What is the maximum switching frequency of ISL6844IUZ-T? A: The maximum switching frequency of ISL6844IUZ-T is typically around 1MHz.

  5. Q: Can ISL6844IUZ-T support both synchronous and non-synchronous buck converter configurations? A: Yes, ISL6844IUZ-T can support both synchronous and non-synchronous buck converter configurations.

  6. Q: Does ISL6844IUZ-T have built-in protection features? A: Yes, ISL6844IUZ-T has various built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: What is the typical efficiency of ISL6844IUZ-T? A: The typical efficiency of ISL6844IUZ-T can exceed 95% when properly designed.

  8. Q: Can ISL6844IUZ-T be used in automotive applications? A: Yes, ISL6844IUZ-T is suitable for automotive applications as it meets the necessary automotive standards.

  9. Q: What is the recommended operating temperature range for ISL6844IUZ-T? A: The recommended operating temperature range for ISL6844IUZ-T is typically between -40°C and +125°C.

  10. Q: Are there any evaluation boards or reference designs available for ISL6844IUZ-T? A: Yes, Intersil provides evaluation boards and reference designs for ISL6844IUZ-T to help with the development and testing process.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.