Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
AT27BV1024-90JU-T

AT27BV1024-90JU-T

Product Overview

Category

AT27BV1024-90JU-T belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: The AT27BV1024-90JU-T retains data even when power is removed.
  • High capacity: It has a storage capacity of 1,024 kilobits (128 kilobytes).
  • Fast access time: The device offers a fast access time of 90 nanoseconds.
  • Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.

Package

The AT27BV1024-90JU-T is available in a standard JEDEC 32-pin PLCC package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT27BV1024-90JU-T is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Organization: 128K x 8 bits
  • Supply voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data retention: 20 years
  • Endurance: 10,000 write cycles

Detailed Pin Configuration

The AT27BV1024-90JU-T has the following pin configuration:

  1. A0
  2. A1
  3. A2
  4. A3
  5. A4
  6. A5
  7. A6
  8. A7
  9. VSS (Ground)
  10. CE (Chip Enable)
  11. OE (Output Enable)
  12. WE (Write Enable)
  13. I/O0
  14. I/O1
  15. I/O2
  16. I/O3
  17. I/O4
  18. I/O5
  19. I/O6
  20. I/O7
  21. NC (No Connect)
  22. VCC (Power Supply)
  23. RP (Reset/Program)
  24. WP (Write Protect)
  25. A8
  26. A9
  27. A10
  28. A11
  29. A12
  30. A13
  31. A14
  32. A15

Functional Features

  • Byte-wide access: The AT27BV1024-90JU-T allows individual byte-level access for efficient data manipulation.
  • High-speed operation: With a fast access time of 90 nanoseconds, it enables quick data retrieval and storage.
  • Hardware and software protection: The device offers write protection features to prevent accidental modification or erasure of stored data.
  • Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for various applications.
  • Fast access time allows for quick data retrieval.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited endurance with a maximum of 10,000 write cycles.
  • Relatively higher cost compared to volatile memory alternatives.

Working Principles

The AT27BV1024-90JU-T is based on Flash memory technology. It utilizes floating-gate transistors to store and retrieve digital information. When data is written, charges are trapped in the floating gate, altering the transistor's behavior. This change in behavior allows the stored data to be read back accurately.

Detailed Application Field Plans

The AT27BV1024-90JU-T finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the AT27BV1024-90JU-T are: - AT28C256-15PU: 256 kilobit (32 kilobyte) non-volatile memory with a slower access time of 150 nanoseconds. - AT45DB161E-SHN2B-T: 16 megabit (2 megabyte) serial Flash memory with higher storage capacity and SPI interface.

These alternative models can be considered based on specific application requirements and cost considerations.

Word count: 511 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του AT27BV1024-90JU-T σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of AT27BV1024-90JU-T in technical solutions:

  1. Q: What is the AT27BV1024-90JU-T? A: The AT27BV1024-90JU-T is a 1-megabit (128K x 8) low-power CMOS EPROM (erasable programmable read-only memory) integrated circuit.

  2. Q: What are the key features of the AT27BV1024-90JU-T? A: Some key features include a fast access time of 90 nanoseconds, low power consumption, wide operating voltage range, and high reliability.

  3. Q: What are the typical applications of the AT27BV1024-90JU-T? A: The AT27BV1024-90JU-T is commonly used in various technical solutions such as microcontroller-based systems, embedded systems, industrial control systems, automotive electronics, and more.

  4. Q: How does the AT27BV1024-90JU-T store data? A: The AT27BV1024-90JU-T uses non-volatile memory cells to store data. These cells can be electrically programmed and erased using specific voltage levels.

  5. Q: Can the AT27BV1024-90JU-T be reprogrammed? A: No, the AT27BV1024-90JU-T is an EPROM, which means it can only be programmed once. It cannot be reprogrammed or erased electrically.

  6. Q: What is the operating voltage range of the AT27BV1024-90JU-T? A: The AT27BV1024-90JU-T operates within a voltage range of 4.5V to 5.5V.

  7. Q: How can I interface the AT27BV1024-90JU-T with a microcontroller? A: The AT27BV1024-90JU-T uses a standard parallel interface, so you can connect it to a microcontroller using address lines, data lines, control signals (such as chip enable and output enable), and power supply connections.

  8. Q: What is the maximum access time of the AT27BV1024-90JU-T? A: The AT27BV1024-90JU-T has a maximum access time of 90 nanoseconds, meaning it takes a maximum of 90 ns to read data from or write data to the memory.

  9. Q: Is the AT27BV1024-90JU-T suitable for high-speed applications? A: While the AT27BV1024-90JU-T has a relatively fast access time, it may not be suitable for extremely high-speed applications where faster memory technologies like SRAM or DDR SDRAM are preferred.

  10. Q: Can the AT27BV1024-90JU-T withstand harsh environmental conditions? A: The AT27BV1024-90JU-T is designed to operate reliably in industrial temperature ranges (-40°C to +85°C) and can withstand moderate levels of shock and vibration, making it suitable for various environments.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.