Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
INA199C1DCKR
Product Overview
Category: Integrated Circuit (IC)
Use: The INA199C1DCKR is a high-side current shunt monitor IC. It is designed to accurately measure current flowing through a shunt resistor in various applications.
Characteristics: - High accuracy and precision - Wide input voltage range - Low offset voltage and drift - Small package size for space-constrained designs - Low power consumption
Package: The INA199C1DCKR is available in a small SOT-23 package, which is suitable for compact circuit designs.
Essence: The essence of the INA199C1DCKR lies in its ability to accurately monitor current flow through a shunt resistor, providing valuable information for system control and protection.
Packaging/Quantity: The INA199C1DCKR is typically sold in reels containing 3000 units.
Specifications
- Supply Voltage Range: 2.7V to 26V
- Input Common-Mode Voltage Range: -0.3V to V+ + 0.3V
- Quiescent Current: 60µA (typical)
- Gain Error: ±0.5% (maximum)
- Bandwidth: 500kHz (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The INA199C1DCKR has five pins:
- V+ (Pin 1): Positive supply voltage pin.
- V- (Pin 2): Negative supply voltage pin.
- OUT (Pin 3): Output pin for the amplified current signal.
- REF (Pin 4): Reference voltage pin for setting the output voltage level.
- IN+ (Pin 5): Positive input pin for connecting to the shunt resistor.
Functional Features
- High-side current sensing: The INA199C1DCKR allows accurate measurement of current on the high side of the load, simplifying system design.
- Wide input voltage range: It can operate with a wide range of supply voltages, making it suitable for various applications.
- Low offset voltage and drift: The IC provides precise measurements by minimizing offset voltage and its variation over time.
- Integrated protection features: The INA199C1DCKR includes built-in protection against overcurrent and overtemperature conditions.
Advantages and Disadvantages
Advantages: - Accurate current measurement - Wide operating voltage range - Small package size - Low power consumption - Integrated protection features
Disadvantages: - Limited to high-side current sensing only - Requires an external shunt resistor for operation
Working Principles
The INA199C1DCKR operates based on the principle of measuring the voltage drop across a shunt resistor. It amplifies this voltage drop and provides an output proportional to the current flowing through the shunt resistor. By accurately measuring this current, the IC enables monitoring and control of various systems.
Detailed Application Field Plans
The INA199C1DCKR finds application in a wide range of fields, including:
- Power management systems: It is used to monitor and control current flow in power supplies, battery management systems, and motor control circuits.
- Industrial automation: The IC is employed in industrial machinery and equipment to measure current in motor drives, robotics, and process control systems.
- Automotive electronics: It plays a crucial role in electric vehicle charging systems, battery monitoring, and automotive control modules.
- Renewable energy systems: The INA199C1DCKR is utilized in solar power inverters, wind turbine control, and energy storage systems to monitor current flow.
Detailed and Complete Alternative Models
- INA199A1DCKR: Similar to the INA199C1DCKR, but with a different gain and offset voltage.
- INA199B1DCKR: Another variant of the INA199 series, offering slightly different specifications.
- INA210: A high-side current shunt monitor IC with additional features such as adjustable gain and integrated temperature sensing.
These alternative models provide similar functionality and can be considered based on specific application requirements.
Word count: 511 words
Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του INA199C1DCKR σε τεχνικές λύσεις
Sure! Here are 10 common questions and answers related to the application of INA199C1DCKR in technical solutions:
Q1: What is the INA199C1DCKR? A1: The INA199C1DCKR is a high-side current shunt monitor that can accurately measure current flowing through a shunt resistor.
Q2: What is the purpose of using the INA199C1DCKR in a technical solution? A2: The INA199C1DCKR is commonly used to monitor and measure current in various applications, such as power supplies, motor control, battery management systems, and industrial automation.
Q3: How does the INA199C1DCKR work? A3: The INA199C1DCKR measures the voltage drop across a shunt resistor and converts it into a proportional output voltage, which can be easily measured and processed by other components.
Q4: What is the maximum current that the INA199C1DCKR can handle? A4: The INA199C1DCKR can handle a maximum current of up to ±100A.
Q5: What is the typical accuracy of the INA199C1DCKR? A5: The typical accuracy of the INA199C1DCKR is around ±0.5% of the measured current.
Q6: Can the INA199C1DCKR operate with a single power supply? A6: Yes, the INA199C1DCKR can operate with a single power supply, typically ranging from 2.7V to 26V.
Q7: Does the INA199C1DCKR provide any built-in protection features? A7: Yes, the INA199C1DCKR includes built-in overcurrent and overtemperature protection features to ensure safe operation.
Q8: Can the INA199C1DCKR be used in high-frequency applications? A8: Yes, the INA199C1DCKR has a wide bandwidth of 500kHz, making it suitable for high-frequency applications.
Q9: Is the INA199C1DCKR available in a small package? A9: Yes, the INA199C1DCKR is available in a small SOT-23 package, which makes it suitable for space-constrained designs.
Q10: Are there any evaluation boards or reference designs available for the INA199C1DCKR? A10: Yes, Texas Instruments provides evaluation boards and reference designs for the INA199C1DCKR, which can help users quickly prototype and integrate the device into their applications.
Please note that these answers are general and may vary depending on specific application requirements.