Texas Instruments
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
SN74AS174DR
Δείτε Λεπτομέρειες Φύλλα δεδομένων

SN74AS174DR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop
  • Characteristics: High-speed, low-power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: D-Type Positive-Edge-Triggered Flip-Flop
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • High-Level Input Voltage: 2V to VCC + 0.5V
  • Low-Level Input Voltage: -0.5V to 0.8V
  • High-Level Output Voltage: VCC - 0.5V
  • Low-Level Output Voltage: 0.5V
  • Maximum Operating Frequency: 100MHz

Detailed Pin Configuration

The SN74AS174DR has a total of 16 pins, numbered as follows:

  1. CLR (Clear)
  2. D (Data)
  3. CLK (Clock)
  4. Q (Output)
  5. GND (Ground)
  6. Q' (Complementary Output)
  7. PRE (Preset)
  8. VCC (Supply Voltage)

The remaining pins are not used.

Functional Features

The SN74AS174DR is a D-Type Positive-Edge-Triggered Flip-Flop. It stores a single bit of data and can be triggered by a clock signal to update its output. The CLR (Clear) and PRE (Preset) inputs allow for resetting or setting the flip-flop to a specific state. The complementary output Q' provides an inverted version of the output Q.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - Compact SOIC package - Versatile functionality with clear and preset inputs

Disadvantages: - Limited operating frequency compared to newer flip-flop models - Not suitable for applications requiring very high-speed operation

Working Principles

The SN74AS174DR operates based on the positive-edge-triggered D-Type Flip-Flop principle. When a rising edge is detected on the CLK (Clock) input, the data present at the D (Data) input is transferred to the Q (Output) and Q' (Complementary Output) pins. The CLR (Clear) and PRE (Preset) inputs can be used to force the output to a specific state.

Detailed Application Field Plans

The SN74AS174DR is commonly used in various digital systems and applications, including:

  1. Register circuits
  2. Counters and dividers
  3. Data storage and transfer systems
  4. Synchronous logic circuits
  5. Control units

Its versatility and reliable performance make it suitable for a wide range of applications that require flip-flop functionality.

Detailed and Complete Alternative Models

  1. SN74LS174N: Similar functionality with TTL-level inputs and outputs.
  2. CD4013BE: Dual D-Type Flip-Flop with complementary outputs.
  3. MC74HC74AN: High-speed CMOS Flip-Flop with preset and clear inputs.

These alternative models offer similar functionality to the SN74AS174DR and can be considered as replacements depending on specific requirements.

Word count: 400 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του SN74AS174DR σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of SN74AS174DR in technical solutions:

  1. Q: What is SN74AS174DR? A: SN74AS174DR is a specific type of integrated circuit (IC) known as a hex D-type flip-flop with clear.

  2. Q: What is the purpose of SN74AS174DR? A: SN74AS174DR is used to store and manipulate digital data in electronic circuits, particularly in sequential logic applications.

  3. Q: What is the voltage range supported by SN74AS174DR? A: SN74AS174DR supports a voltage range of 4.5V to 5.5V.

  4. Q: How many flip-flops are there in SN74AS174DR? A: SN74AS174DR contains six individual flip-flops, making it a hex D-type flip-flop.

  5. Q: What is the maximum clock frequency supported by SN74AS174DR? A: SN74AS174DR can operate at a maximum clock frequency of 100 MHz.

  6. Q: Can SN74AS174DR be used for both synchronous and asynchronous operations? A: Yes, SN74AS174DR can be used for both synchronous and asynchronous operations depending on the application requirements.

  7. Q: Does SN74AS174DR have any built-in clear functionality? A: Yes, SN74AS174DR has a clear input that allows all flip-flops to be reset simultaneously.

  8. Q: What is the power supply current required by SN74AS174DR? A: The power supply current required by SN74AS174DR is typically around 8 mA.

  9. Q: Can SN74AS174DR be cascaded to increase the number of flip-flops? A: Yes, SN74AS174DR can be cascaded with other similar ICs to increase the number of flip-flops in a circuit.

  10. Q: What are some typical applications of SN74AS174DR? A: SN74AS174DR is commonly used in applications such as counters, shift registers, frequency dividers, and data storage systems.

Please note that these answers are general and may vary depending on specific application requirements and circuit design considerations.