SN74AVC16374DGVR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Flip-Flop / Latch
• Characteristics: High-speed, low-power, 16-bit D-type flip-flop with 3-state outputs
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: This IC is designed to store and transfer data in digital systems.
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Number of Bits: 16
• Logic Family: AVC
• Supply Voltage Range: 1.2V to 3.6V
• Input/Output Type: CMOS
• Output Current: ±12mA
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay Time: 2.5ns (typical)

Detailed Pin Configuration

The SN74AVC16374DGVR has a total of 48 pins, which are divided into various functional groups:

• GND (Ground): Pins 8, 17, 24, 33, 40, 47
• VCC (Power Supply): Pins 1, 16, 25, 32, 41, 48
• Data Inputs (D0-D15): Pins 2-7, 9-14, 18-23, 26-31
• Data Outputs (Q0-Q15): Pins 34-39, 42-46
• Clock (CLK): Pin 15
• Output Enable (OE): Pin 35
• Master Reset (MR): Pin 36

Functional Features

• High-Speed Operation: The SN74AVC16374DGVR can operate at high clock frequencies, making it suitable for use in fast digital systems.
• Low-Power Consumption: This IC is designed to minimize power consumption, making it energy-efficient.
• 3-State Outputs: The 16-bit outputs can be put into a high-impedance state, allowing multiple devices to share the same bus without interference.

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer. - Low-power consumption helps conserve energy. - 3-state outputs enable bus sharing in complex systems.

Disadvantages: - Limited number of bits (16) may not be sufficient for certain applications requiring larger data storage. - Requires careful handling due to its small package size.

Working Principles

The SN74AVC16374DGVR operates based on the principles of flip-flops and latches. It stores and transfers data using D-type flip-flops, which are controlled by clock signals. The inputs (D0-D15) are latched and stored when the clock signal transitions from low to high. The stored data can then be accessed through the outputs (Q0-Q15). The output enable (OE) pin controls whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

The SN74AVC16374DGVR is commonly used in various digital systems, including:

1. Microprocessors and Microcontrollers: Used for data storage and transfer between the processor and other peripherals.
2. Communication Systems: Facilitates data transmission and reception in networking equipment.
3. Memory Modules: Enables data buffering and synchronization in memory modules.
4. Industrial Automation: Used in control systems for storing and transferring digital signals.
5. Automotive Electronics: Utilized in vehicle electronics for data processing and communication.

Detailed and Complete Alternative Models

1. SN74AVC16374ZQLR: Similar to SN74AVC16374DGVR but with different package (BGA) and quantity (2000 units per reel).
2. SN74AVC16374DLR: Similar to SN74AVC16374DGVR but with different package (SSOP) and quantity (3000 units per reel).
3. SN74AVC16374KR: Similar to SN74AVC16374DGVR but with different package (QFN) and quantity (4000 units per reel).

These alternative models offer similar functionality but may vary in package type, quantity per reel, or other minor specifications.

Word count: 511 words