Torex Semiconductor Ltd
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
XC6108N12DGR-G
Δείτε Λεπτομέρειες Φύλλα δεδομένων

XC6108N12DGR-G

Product Overview

Category

XC6108N12DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation
  • Stabilization of output voltage
  • Compact size
  • Low power consumption

Package

XC6108N12DGR-G comes in a small surface-mount package.

Essence

The essence of XC6108N12DGR-G lies in its ability to provide stable voltage output for electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.2V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N12DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N12DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive heat, the regulator shuts down to protect itself and the circuitry.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output, ensuring reliable performance of connected devices.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6108N12DGR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6108N12DGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N12DGR-G are: - LM1117-1.2 - MCP1700-1202E/TO - TS2937CP-1.2

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 311 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του XC6108N12DGR-G σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of XC6108N12DGR-G in technical solutions:

1. What is XC6108N12DGR-G? - XC6108N12DGR-G is a voltage detector IC (Integrated Circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

2. What is the operating voltage range of XC6108N12DGR-G? - The operating voltage range of XC6108N12DGR-G is from 0.7V to 6.0V.

3. What is the output type of XC6108N12DGR-G? - XC6108N12DGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

4. What is the typical quiescent current of XC6108N12DGR-G? - The typical quiescent current of XC6108N12DGR-G is around 1.0µA, making it suitable for low-power applications.

5. How does XC6108N12DGR-G detect voltage levels? - XC6108N12DGR-G detects voltage levels by comparing the input voltage with a fixed threshold voltage. When the input voltage drops below the threshold, the output becomes active.

6. Can XC6108N12DGR-G be used for overvoltage protection? - No, XC6108N12DGR-G is primarily designed for undervoltage detection. It is not suitable for overvoltage protection applications.

7. What is the maximum voltage that XC6108N12DGR-G can tolerate on its input pin? - The maximum voltage that XC6108N12DGR-G can tolerate on its input pin is 6.5V.

8. Can XC6108N12DGR-G be used in automotive applications? - Yes, XC6108N12DGR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage detection.

9. Does XC6108N12DGR-G have built-in hysteresis? - Yes, XC6108N12DGR-G has a built-in hysteresis of typically 0.1V, which helps to prevent output oscillation near the threshold voltage.

10. What is the package type of XC6108N12DGR-G? - XC6108N12DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are based on general information about XC6108N12DGR-G and may vary depending on specific application requirements.