Torex Semiconductor Ltd
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
XC6120N192HR-G
Δείτε Λεπτομέρειες Φύλλα δεδομένων

XC6120N192HR-G

Product Overview

Category

The XC6120N192HR-G belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits and devices.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • High ripple rejection
  • Small package size

Package

The XC6120N192HR-G is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable voltage regulation in a compact form factor.

Packaging/Quantity

The product is typically supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV @ 100mA
  • Quiescent Current: 30μA (typical)
  • Ripple Rejection: 70dB @ 1kHz

Detailed Pin Configuration

The XC6120N192HR-G has a standard SOT-23-5 pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. CE (Enable Control)

Functional Features

  • Low dropout voltage ensures efficient use of input power.
  • Low quiescent current minimizes power consumption in standby mode.
  • High ripple rejection provides clean output voltage.

Advantages

  • Small package size allows for space-efficient PCB design.
  • Wide input voltage range enables flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • No built-in overcurrent or thermal protection features.

Working Principles

The XC6120N192HR-G operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is well-suited for portable electronic devices, battery-powered applications, and low-power sensor nodes where space and power efficiency are critical.

Detailed and Complete Alternative Models

  • XC6206P182MR-G: Similar low dropout voltage regulator with higher maximum output current.
  • XC6220B182MR-G: Ultra-low quiescent current regulator for battery-powered applications.

In conclusion, the XC6120N192HR-G is a compact and efficient voltage regulator suitable for low-power electronic applications requiring stable voltage regulation within a limited space.

[Word Count: 366]

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του XC6120N192HR-G σε τεχνικές λύσεις

Sure, here are 10 common questions and answers related to the application of XC6120N192HR-G in technical solutions:

  1. What is the input voltage range for XC6120N192HR-G?

    • The input voltage range for XC6120N192HR-G is 2.5V to 6.0V.

  2. What is the typical output current of XC6120N192HR-G?

    • The typical output current of XC6120N192HR-G is 150mA.

  3. What is the dropout voltage of XC6120N192HR-G?

    • The dropout voltage of XC6120N192HR-G is typically 160mV at 100mA.

  4. What is the quiescent current of XC6120N192HR-G?

    • The quiescent current of XC6120N192HR-G is typically 75μA.

  5. What is the operating temperature range for XC6120N192HR-G?

    • The operating temperature range for XC6120N192HR-G is -40°C to 85°C.

  6. Can XC6120N192HR-G be used in battery-powered applications?

    • Yes, XC6120N192HR-G is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  7. Is XC6120N192HR-G suitable for space-constrained designs?

    • Yes, XC6120N192HR-G comes in a small USP-4 package, making it suitable for space-constrained designs.

  8. Does XC6120N192HR-G have built-in overcurrent protection?

    • Yes, XC6120N192HR-G has built-in overcurrent protection to safeguard the device and the load.

  9. Can XC6120N192HR-G be used in automotive electronics applications?

    • Yes, XC6120N192HR-G is AEC-Q100 qualified, making it suitable for automotive electronics applications.

  10. What are the typical applications for XC6120N192HR-G?

    • Typical applications for XC6120N192HR-G include power supplies for portable devices, battery-powered equipment, and automotive electronics.

Feel free to ask if you have any more questions or need further information!