Torex Semiconductor Ltd
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
XC6123E620MR-G
Δείτε Λεπτομέρειες Φύλλα δεδομένων

XC6123E620MR-G

Product Overview

Category

XC6123E620MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6123E620MR-G comes in a small SOT-23-5 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically available in reels containing a specific quantity, usually specified by the manufacturer.

Specifications

The specifications of XC6123E620MR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.0V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (at 100mA)
  • Quiescent Current: 20µA (typical)

Pin Configuration

The XC6123E620MR-G has the following pin configuration:

```

| | --| VOUT| --| GND | --| VIN | |____| ```

Functional Features

  • Low dropout voltage: The XC6123E620MR-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low quiescent current: With a typical quiescent current of only 20µA, this voltage regulator minimizes power consumption when the load is light.
  • Short-circuit protection: The device incorporates short-circuit protection, safeguarding against potential damage caused by excessive current flow.

Advantages and Disadvantages

Advantages: - Small package size allows for space-efficient integration into various electronic devices. - Low dropout voltage ensures efficient regulation even with low input voltages. - Low quiescent current reduces power consumption during standby or light load conditions.

Disadvantages: - Limited maximum output current of 200mA may not be suitable for high-power applications. - Fixed output voltage may not be adjustable to meet specific requirements.

Working Principles

The XC6123E620MR-G is a linear voltage regulator that operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the circuit to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The XC6123E620MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to XC6123E620MR-G include: - XC6123E610MR-G: Similar specifications but with an output voltage of 1.0V. - XC6123E630MR-G: Similar specifications but with an output voltage of 3.0V. - XC6123E640MR-G: Similar specifications but with an output voltage of 4.0V.

These alternative models provide flexibility in choosing the desired output voltage for specific applications.

Word count: 346 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του XC6123E620MR-G σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of XC6123E620MR-G in technical solutions:

  1. Question: What is XC6123E620MR-G?
    - Answer: XC6123E620MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123E620MR-G?
    - Answer: The operating voltage range of XC6123E620MR-G is from 0.6V to 6.0V.

  3. Question: How does XC6123E620MR-G work?
    - Answer: XC6123E620MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6123E620MR-G?
    - Answer: XC6123E620MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6123E620MR-G?
    - Answer: The typical quiescent current consumption of XC6123E620MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6123E620MR-G be used for undervoltage and overvoltage detection?
    - Answer: Yes, XC6123E620MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of XC6123E620MR-G?
    - Answer: The accuracy of XC6123E620MR-G is typically ±2.0%.

  8. Question: Can XC6123E620MR-G be used in automotive applications?
    - Answer: Yes, XC6123E620MR-G is suitable for automotive applications as it meets the AEC-Q100 standard.

  9. Question: What is the temperature range of XC6123E620MR-G?
    - Answer: The temperature range of XC6123E620MR-G is from -40°C to +85°C.

  10. Question: How can XC6123E620MR-G be connected in a circuit?
    - Answer: XC6123E620MR-G requires an external pull-up resistor connected between the output pin and the supply voltage. The input pin should be connected to the voltage being monitored.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.