Torex Semiconductor Ltd
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
XC6124A527MR-G
Δείτε Λεπτομέρειες Φύλλα δεδομένων

XC6124A527MR-G

Product Overview

Category

XC6124A527MR-G belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6124A527MR-G is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6124A527MR-G is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.27V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Built-in overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption
  • Overcurrent and short-circuit protection

Disadvantages

  • Limited output current capacity
  • Higher dropout voltage compared to some alternatives

Working Principles

XC6124A527MR-G operates by regulating the input voltage to maintain a constant output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring stability and reliability.

Detailed Application Field Plans

XC6124A527MR-G finds applications in various electronic devices, including: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable technology

Detailed and Complete Alternative Models

  1. XC6124A527MR-G-7: Similar to XC6124A527MR-G but with a different package size.
  2. XC6124B527MR-G: A variant with higher output current capacity.
  3. XC6124C527MR-G: Another alternative with lower dropout voltage.

Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's documentation for a complete list.

Word count: 305 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του XC6124A527MR-G σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of XC6124A527MR-G in technical solutions:

  1. Question: What is the XC6124A527MR-G?
    Answer: The XC6124A527MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124A527MR-G?
    Answer: The operating voltage range of XC6124A527MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6124A527MR-G work?
    Answer: XC6124A527MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.

  4. Question: What is the output type of XC6124A527MR-G?
    Answer: XC6124A527MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current of XC6124A527MR-G?
    Answer: The typical quiescent current of XC6124A527MR-G is 1.0µA.

  6. Question: Can XC6124A527MR-G be used in battery-powered applications?
    Answer: Yes, XC6124A527MR-G is suitable for battery-powered applications due to its low quiescent current, which helps conserve battery life.

  7. Question: What is the hysteresis voltage of XC6124A527MR-G?
    Answer: The hysteresis voltage of XC6124A527MR-G is typically 0.1V, which helps prevent output oscillation near the threshold voltage.

  8. Question: Can XC6124A527MR-G be used in automotive applications?
    Answer: Yes, XC6124A527MR-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring.

  9. Question: What is the temperature range for XC6124A527MR-G?
    Answer: The temperature range for XC6124A527MR-G is from -40°C to +85°C.

  10. Question: Is XC6124A527MR-G available in a surface-mount package?
    Answer: Yes, XC6124A527MR-G is available in a compact SOT-25 package, making it suitable for space-constrained applications.

Please note that these answers are based on general information about the XC6124A527MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.