Torex Semiconductor Ltd
Η εικόνα μπορεί να είναι αναπαράσταση.
Δείτε τις προδιαγραφές για λεπτομέρειες προϊόντος.
XC6124C626MR-G
Δείτε Λεπτομέρειες Φύλλα δεδομένων

XC6124C626MR-G

Product Overview

Category

XC6124C626MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6124C626MR-G comes in a small surface-mount package.

Essence

The essence of XC6124C626MR-G is its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C626MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124C626MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Low quiescent current: The regulator consumes minimal current when not actively regulating voltage.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic designs.
  • Low power consumption makes it suitable for battery-powered applications.
  • High efficiency minimizes power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6124C626MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6124C626MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124C626MR-G are: - XC6206P182MR - XC6210B332MR - XC6220B502MR - XC6230A252MR

These models have different specifications and pin configurations, allowing designers to choose the most suitable option for their specific requirements.

Word count: 389 words

Καταγράψτε 10 συνήθεις ερωτήσεις και απαντήσεις που σχετίζονται με την εφαρμογή του XC6124C626MR-G σε τεχνικές λύσεις

Sure! Here are 10 common questions and answers related to the application of XC6124C626MR-G in technical solutions:

  1. Q: What is XC6124C626MR-G? A: XC6124C626MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124C626MR-G? A: The operating voltage range of XC6124C626MR-G is from 0.6V to 6.0V.

  3. Q: How does XC6124C626MR-G work? A: XC6124C626MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.

  4. Q: What is the output type of XC6124C626MR-G? A: XC6124C626MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current of XC6124C626MR-G? A: The typical quiescent current of XC6124C626MR-G is around 1.0µA.

  6. Q: Can XC6124C626MR-G be used for undervoltage and overvoltage detection? A: Yes, XC6124C626MR-G can be used for both undervoltage and overvoltage detection by setting appropriate threshold voltages.

  7. Q: What is the accuracy of XC6124C626MR-G? A: The accuracy of XC6124C626MR-G is typically ±2%.

  8. Q: Can XC6124C626MR-G be used in battery-powered applications? A: Yes, XC6124C626MR-G can be used in battery-powered applications as it has a low quiescent current and wide operating voltage range.

  9. Q: Does XC6124C626MR-G have built-in hysteresis? A: Yes, XC6124C626MR-G has built-in hysteresis to prevent output oscillation near the threshold voltage.

  10. Q: What is the package type of XC6124C626MR-G? A: XC6124C626MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.